Pitney Bowes RISO ComColor Printer User Manual
Page 30
2-8
ComColor Series Troubleshooting Guide 01
No paper is fed. / Multiple sheets of paper
are being fed. / The back of a card is turned
outward.
Paper feed settings do not match the paper properties (paper
thickness).
Configure the paper feed settings that match the paper properties using
the [Paper type] for the feed tray.
For details, see "Feed Tray" in the "User's Guide."
The paper feed pressure adjustment lever does not fit the paper
thickness.
Use the paper feed pressure adjustment lever to adjust the paper feed
pressure according to the loaded paper.
Set the lever to [ (NORMAL)] or [
(CARD)] according to the paper
type.
• Normally, set the lever to
[ (NORMAL)]. If paper feeding
is a problem, set this to
[
(CARD)].
For details on the paper feed
pressure adjustment lever and
paper type, see "Paper and
Originals" in the"Basic Guide".
Problem
Possible Cause and Action to Take