Pitney Bowes RISO ComColor Printer - Manual (Page 53)

3-3
3
ComColor Series Troubleshooting Guide 01
4
Hold the tabs on the left and right of the
new staple cartridge, and install the
staple cartridge to its original position in
the staple unit.
Push in the center (round dent) of the cartridge
strong.
If not pushed in entirely, the cartridge will be
loose, which may result in staples not being
fed.
5
Return the staple unit to its original
position.
6
Close the cover.
The message may appear even if there are
staples remaining. In that case, replace the
staple case. The remaining staples can be
used.
1
Open the staple cover.
2
Hold the handle of the cartridge, and pull
it toward you.
3
Press the positions indicated by the
arrows a to unhook the hooks, and
remove the staple unit.
Replacing the Staple Cartridge
(Face down offset stapler)