Pitney Bowes RISO ComColor Printer - Manual (Page 51)

3-1
3
ComColor Series Troubleshooting Guide 01
Chapter 3 Maintenance
Replacing the Staple Cartridge
When there are no more staples, printing stops and a message appears on the touch panel.
Check the message, and then use the following procedure to replace the staple cartridge.
The message may appear even if there are
staples remaining. In that case, replace the
staple case. The remaining staples can be
used.
1
Open the cover.
2
Remove the staple cartridge by holding
the cartridge handle and pulling the
staple cartridge toward you while slightly
lifting it.
3
Press the parts on the staple cartridge
indicated with arrows, open the staple
cartridge cover, and remove the staple
case.
4
Insert a new staple case into the staple
cartridge.
5
Remove the tape from the staple case.
Replacing the UR1 Staple Cartridge
(Multifunction finisher)