BINDER FDL 115 - Manual (Page 54)

FDL (E2.1) 02/2015 page 54/75
With the option coil-coating you can put in the test sheet only via the flap. The unit may only
be used for simulation of coil coating applications.
13.4 Additional measuring channel for digital object temperature indicator with
pincer-type sensor (option)
The object temperature display enables the determination of the actual temperature of the specimen dur-
ing the whole process. The supplied pincer-type is used to display the object temperature at Display 2 of
the RD3 controller.
The object temperature data are put out together with the data of the temperature controller to the RS
422 interface as a second measuring channel and can be documented by the communication software
APT-COM™ developed by BINDER (option, chap. 13.1).
Socket
(inner chamber
Pincer-type sensor
Material sample
Figure 12: Sensor probes for optional temperature display
With this option the chamber is equipped with an analog output 4-20 mA for temperature. This output
permits transmitting data to external data registration systems or devices.
The connection is realized as a DIN socket at the rear of the chamber as following:
ANALOG OUTPUT 4-20 mA DC
PIN 1: temperature –
PIN 2: temperature +
Temperature range:
0 °C / 32 °F to +300 °C / 572 °F
A suitable DIN plug is enclosed.
Figure 13: Pin allocation of DIN socket