Casella CEL Software for Nomad (User Configuration) User Manual
Page 30
6.6
Sending a Configuration to the Monitor
System
This section describes how Online Pro can be used to up-load configuration
data to the monitor system. This operation can be performed only with
monitor system that are connected directly to the PC, via a modem, a GSM
modem, or via a Sensus with a modem.
1.
Select the
Monitor Systems
menu.
2.
Click the
Properties...
option to display the Monitor Systems dialog.
3.
Select the monitor system to be configured and click the
Properties...
button to display its Properties dialog.
4.
Click the
Advanced
button on the Name page.
Monitor system connected via a network, wind speed and
direction sensors, particle counters and Multimet stations CANNOT
be configured by uploading from Online Pro.
For all monitor systems that can be configured by uploading from
Online Pro, the Advanced dialog shown below will be displayed, go
to step 8.
Configuration
Page 64 of 68
ONLINE Pro Application Software for
Automatic Monitor Systems - Users Handbook