CONTA-CLIP CONTA-Sign 4.3 - Manual (Page 15)

5.9 Copying functions
To avoid having to repeatedly enter the same or similar sequences, the program
provides a multiple number of copying functions:
5.9.1. Copying a marking sequence
Select a sequence by clicking it with the left mouse button. Now click the right mouse
button and choose > Copy marking (only tags with text) from the
shortcut menu.
Then use the left mouse button to select the element where the
copied sequence is to be inserted.
Open the shortcut menu by right-clicking and choose
> Paste marking. If desired, the sequence can be altered.
The copy/paste functions can also be accessed via the
icons / on the toolbar or by choosing > Edit from the
menu bar.
5.9.2. Copying several marking sequences
To copy several sequences, you can use the Shift - key to extend and select the area
to be copied. Copy and paste as described above.
Note: Simultaneous copying of multiple sequences to other types of tags
is not possible.
5.9.3. Copying parts of marking sequences
To copy individual markings from within sequences follow these steps:
Hold down the Ctrl - key and select all the labels you wish to copy by clicking them
with the left mouse button. Copy and paste as described above.
Note: Simultaneous copying of partial marking from multiple sequences to
other types of tags is not possible.
5.9.4. Copying of marking with empty signs
If you want to copy a range of tags, including non marked tags, mark these
and click the right mouse button, select in the menu
> Copy marking (including signs without text).
Copy and paste as described above.
14