CONTA-CLIP CONTA-Sign 4.3 - Manual (Page 32)

9. Engraving Tags
Please select the output device first in order to start engraving with the
EMS-2 Engraver (see also chapter 3 page 3). In the upper left corner of the screen
you will find the information.
Connect the engraving unit according to the manual and switch on the Controller
first, followed by the plotter EMS-2.
The steps getting used to the software, starting at chapter 5, are not changed using
the engraver. Just where the functions are different or additional a new description is
implemented into the manual as described in the following.
9.1 Engraving with the EMS-2 Engraver
Double-click the tag or element where the engraving process is to begin.
This opens the labeling dialog box, which contains all the setting options. In order to
open the edit window, please click on the first tag to start with, use the right
mouse button and choose > Labeling from the menu (see also item 5.4 page 7) or
start typing a character on the keyboard (check under > Extras> Option from the menu
first).
Further adjustments using the engraving tool
are available by clicking on the button
Adjustments Engraving Tool
31