CONTA-CLIP CONTA-Sign 4.3 - Manual (Page 19)

Different print options could be set up in the lower part of the window:
Use one Plotter Pen Size only
In order to execute this job, two or more pens
to be used might be indicated. If you
like to use one tip size, please check this box
and select the respective Pen.
Use Pen inserted in Pen Holder
Once checked this box, no Pen will be picked
up from the Pen Station. The pen directly
inserted into the Pen Holder will be used. This
option could be used, if pens
used are different from the EK-Team Pens, although they might have a HP compatible
outside dimension, but will not fit into the Pen Station of the plotter.
Use one Plotter Speed only
In order to execute this job, different speeds (10 to 40 mm per second) could be
selected from the data entry. In order to work with one speed selection only, please
check this box and select the respective speed.
Print selected tags only
If you check this box, only the tags marked before are subject to be printed.
Select a sequence
Just click in the edit window on the sequence once and it is marked.
Select multiple sequences
Just click in the edit window on the first sequence once, hold down the
Shift Button and click on the next sequence ones etc. and all are marked.
Select single tags
Hold down the Ctrl Button and just click in the edit window on the single
tag or multiple tags once and they are marked.
Print selected segments only
If you check this box, only the segments marked before are subject to be printed.
Just click in the edit window on the segment once and it is marked. In order to mark
two or more segments, hold down the Ctrl Button and click on each segment once.
18