CONTA-CLIP CONTA-Sign 4.3 - Manual (Page 17)

5.11 Control print of the labeling data
You can send the print data to a standard printer by selecting
> Extras from the main menu.
Print all segments:
The printer prints two quarter size segments per page, a two page
printout from the EMS-2 full size
Print selected segments only:
The printer prints one page with the selected segment.
5.12 Preferences
Choose > Extras > Options from the menu bar for opening the window to select form.
To select the language please check the next window coming up.
Before the plot starts a message comes
up, reminding you how to treat the
plotter pens. If you don´t like to have it
come up please check the mark. If you select a tag ready for labe-
ling, you can just start to enter the character on the keyboard as
first character accepted, the labeling window opens and the character is
placed on the selected tag. If you don´t like to have it in place please
check the mark.
5.13 No. of projects and base plates allowed
Choose > Windows from the menu bar in order to receive the
overview of your actual project no. and base plates activated.
In total you can have up to 10 different projects and up to 16 base plates from each
project open and work with.
5.14 Information menu > ?
Choose > ? from the menu bar to receive further information about the system.
If you select Support plates, a window with different lists comes up,
showing the actual available support plates, the description and part no.
If you select Online-help, a description of general features of the software
is available. You can click within the software at any time on the icon
or open the help file from the menu bar > ? > Online-Help.
The information window opens from the
menu bar > ? > Information with important information
about the software version, the release of the database
and the firmware of the EMS-2. To close the window
click on the OK button.
16