CONTA-CLIP CONTA-Sign 4.3 User Manual
Page 28
8.3 Example for designing same sized labels for endless TT-Printer
Open the designer from the main menu with > Extras > Labels
> Designer endless labels as described above.
The following window appears:
With a click on the button New a new ele-
ment can be named in the window
under <Untitled>.
Confirm the new name by clicking on Edit
and the new window for entering the data of
the label will open up.
Take the measurements of the label and the distance between two labels.
Enter the data into each field incl. the no. of labels in x-direction,
confirm the entry with Accept and the labels will be shown as designed.
Please check if all measurements were taken
correctly. With Close the designer will be
terminated.
After selecting from the main menu > New the
correct output device, the designed labels are
available for labeling in the folder
> User defined under > Producer (manufacturer).
27