CONTA-CLIP CONTA-Sign 4.3 - Manual (Page 40)

11. Firmware update of the plotter 11. Firmwareupdate des Plotters 12. Printing on other output devices
With the connection of other output devices, labeling data could be printed on
Thermal-Transfer Printer (TT-Printer) as well as standard Office Printer.
As described in chapter 8 the labels need to be designed first.
12.1 Printing on endless TT-Printer
Please select first the output device from the main menu > File > New.
In the upper left corner of the screen you will find the information
The designed labels are available for labeling in the folder > User defined under
> Producer (manufacturer).
Enter the labeling data in the editing window as
usual. The data can be changed and modified as
described in chapter 5.4 to 5.6.
By selecting a margin, a fixed distance within the
label can be set, making sure the print is always
within the label area.
In addition the text can be manipulated for printing
in Bold, Italic, Underline, clicking OK transfers the
data to the label.
After all entries are completed,
click on the icon Print / Plot / Engrave.
A message window opens up with the information to
select first a system printer, clicking OK opens the
window with the available printer list, please select
the TT-Printer.
If necessary you can change the size of the label just
to perform a final correction of the total length
by entering a factor.
Clicking on Apply, opens the print window with the
possibility of entering the margin to the left border of
the endless labels.
Please confirm with OK and the printout will be
started.
Please check the print on the label regarding
the position, if necessary change the entry of
the left border margin or go back to the
designer and make the corrections in view of
size and distance of the label.
39