CONTA-CLIP CONTA-Sign 4.3 - Manual (Page 42)

11. Firmware update of the plotter 11. Firmwareupdate des Plotters In the top part of the window you enter the no. of copies, in the lower part you have
the following choices to select from:
Print frame around lettering
With this option selected, a frame will be
printed around the lettering.
Print frame only
With this option selected, the frame will be
printed only without the lettering.
All selected tags will be printed
If you check this box, only the labels marked before are subject to be printed.
Please confirm with OK and the printout will be started. Check the print on the
label regarding the position, if necessary change the entry of the upper and left
border margin or go back to the designer and make the corrections in view of size
and distance of the label.
41