CONTA-CLIP CONTA-Sign 4.3 - Manual (Page 26)

Please click on the button Accept in the window and the new designed
element will be shown.
Now you can check, if all
the data where taken
correctly. Any up-coming
error or warning message
at this point means,
please re-check the data
manually or allow the
automatic correction by the program.
Click on the button Close in order to
terminate the designer program.
You can find the new element for
labeling in the folder > User defined
under > Producer.
Note: All new elements in the folder User defined will continue
to be available after program updates.
8.2 Example for designing a serial no. plate with different sized label areas for
plotting and engraving
Open the designer from the main menu with > Extras > Elements > Design tags with
different sizes.
The same window appears, as described before for designing
tags with the same size. All adjustments will be done in the same
manner. After clicking on the button Edit a similar window
appears, extended by additional functions.
Now you have the ability to implement different sized
labeling areas. Each new area or field needs to have an own name.
Taking the measurements is now similar to the
previous sample of the label sheet matrix.
Example
25