Televes Serie H-60 - Manual (Page 127)

127
EN
3.3.3.3.- Channel search
The H60 incorporates the automatic channel search function.
Channel Search is a simplified function of the SCAN&LOG .
The search for terrestrial channels will always be carried out based on the channel plan that we
have selected. Using the satellite mode, the search will be based on the tuning mode we are
showing: by channel plan or frequency.
3.3.3.3.1.- Next channel
Selecting this function or if we press the key , the meter will search for the next position
occupied by a channel, identifying in the case of the terrestrial band, whether it is an analog or
digital channel and, after tuning in on the channel, the meter will adopt the respective setting
(digital or analog).
3.3.3.3.2.- Previous channel
If we select this function or if we apply prolonged pressure to the key , the meter will
search for the previous position occupied by a channel, identifying in the case of the terrestrial
band, whether it is an analog or digital channel and, after tuning in on the channel, the meter
will adopt the respective setting (digital or analog).
If you wish the meter to search for channels, identify them and carry out measuring
automatically, consult the
SCAN&LOG section.
01031052_002_EN:103130_00.qxd 10/07/2013 8:01 Página 127