Televes Serie H-60 User Manual
Page 151
Advertising
151
EN
- Input signal: Selects the input type: Optical / RF
- Lambda: When the optical input is activated, it selects the lambda at which the measurement
will be made: 1310nm, 1490nm or 1550nm.
- Optical drives: When the optical input is activated, it selects the type of units used: dBm, mW
/ µW or dB.
- Optical baseline: Displays the optical baseline. To select a new value, use the Set Optical
Baseline option.
- Optical input settings -
01031052_002_EN:103130_00.qxd 10/07/2013 8:01 Página 151
Advertising