Televes Serie H-60 - Manual (Page 84)

84
TV Mode
Parameter description is as follows:
To stop viewing the line, this option must be pressed again, or you must enter a mode that is
different from terrestrial Analog.
Line
Number
This is where we show the line we wish to view. This value must be
between 1 and 625 for standard PAL and between 1 and 525 for
standard NTSC.
To change this value, we can use the or press key to introduce
the value directly and to validate.
Zoom
In this option we choose the zoom we wish to apply on the line, choosing
from among 1x, 2x, 4x and 8x.
To change the option we can use the .
Offset
This option may be used to browse the line in the event we have a zoom
value that is different from 1x.
To change the option we can use the .
Channel
This indicates the channel we are viewing.
If we press the key the channel name will be shown, and if we
press the channel frequency will be shown. To change channels, we
can press or , according to whether we are viewing the channel
name or frequency, and insert the new channel, confirming this with .
We can also use the to change the value.
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 84