Televes Serie H-60 - Manual (Page 128)

128
Analyzer
3.3.4.- Analyzer
If this menu is chosen, you will automatically go to the spectrum analyzer mode . In this mode
you will see the signal spectrum according to the selected span and the tuned frequency. The
lower part of the screen (under the spectrum) is used to show the measures, parameters, etc.
The menu texts are hidden by default, with the purpose of complete spectrum viewing. When
the user needs to access the menus, he can do so by simply pressing the following key .
If any analog measure is selected, at the central part of the spectrum you will see an interrupted
yellow line (dashes), while if any digital measure is selected, this line will not appear, being
replaced by two interrupted yellow lines at equal distances from the central line of the
spectrum. The separation between these lines shows the bandwidth of the channel which is
selected at that moment.
- Spectrum analyzer mode. Frequency tuning (analogue channel) -
- Spectrum analyzer mode. Channel tuning (digital channel) -
Reference
level
Simultaneous
multiple
measures
Central
spectrum
frequency
marker
Tuned
frequency
Horizontal span
Resolution
Filter
Reference
level
Simultaneous
multiple
measures
Central
spectrum
frequency
marker
Tuned
channel
Horizontal span
Resolution
Filter
01031052_002_EN:103130_00.qxd 10/07/2013 8:01 Página 128