Televes Serie H-60 - Manual (Page 81)

81
EN
3.3.2.9.3.- Extended information
This screen shows information that should be supplied to the technical service whenever
technical assistance is needed.
3.3.2.9.4.- Factory configuration
This returns the equipment to the ex-factory configuration.
- Factory configuration -
To confirm the change, you must press the key , if any other key is pressed instead, the
change will be cancelled.
All changes carried out in the equipment will be lost, except Memories , Macros , LOGs
and Graphs .
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 81