UEBO S400 - Manual (Page 125)

UEBO S400 User Manual
3-13
4. Run the following command to connect the iSCSI volume.
iscsiadm -m node -p 172.19.62.88 -T
iqn.2007-10..com:415154837raid5.iscsi –l Run the fdisk-1
command after the iSCSI volume is connected. Then, you can view that the Disk
/dev/sdb (connected to the iSCSI volume) directory is added as follows:
5. Run the following command to disconnect the iSCSI volume.
iscsiadm -m node -p 172.16.96.2 -T
iqn.2007-10.uit.com:22124056raid1.iscsi –u
Then, run the fdisk-1 command. The previous Disk /dev/sdb directory does not
exist. For details, refer to the following figure: