UEBO S400 - Manual (Page 46)

UEBO S400 User Manual
2-37
Caution:
1. The Jumbo Frame is valid only on the Gigabit network. Therefore, ensure that the
same value is set. The network configuration is not valid unless the Jumbo Frame
is enabled on all devices and the same MTU value is set.
2. Ensure that the network IP address and the gateway IP address are at the same
network segment and are set correctly. Otherwise, the whole network is disabled.
3. Ensure that only a DHCP IP address is set between the two network ports when
selecting the Standalone network mode.
2.3.3.2. Advanced Options
System Status
 Choose Advance Options > System Status.
The System Status interface is displayed. On this interface, you can query the
system status in real time.