Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) - Manual (Page 101)

Example Applications
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide 101
-s VALUE set control value VALUE
[1=Graceful Reboot, 2=Diagnostic Interrupt]
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpifumi
#------------------------------#
Usage: hpifumi [OPTION]...
HPI example application to manage the firmware upgrade of FRUs using FUMI.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-r RESOURCE_ID use resource with id RESOURCE_ID
-f FUMI_NUM use fumi with number FUMI_NUM
-b BANK_NUM use bank with number BANK_NUM
-s URI calls saHpiFumiSourceSet URI
-u calls saHpiFumiInstallStart
-v calls saHpiFumiSourceInfoValidateStart
-i calls saHpiFumiSourceInfoGet
-t calls saHpiFumiTargetInfoGet
-a calls saHpiFumiActivate
-g calls saHpiFumiUpgradeStatusGet
-y calls saHpiFumiTargetVerifyStart
-c calls saHpiFumiUpgradeCancel
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpiha
#------------------------------#
Usage: hpiha [OPTION]...
HPI example application to show the HA state and to initiate a switch-over.
Options:
-d <domain ID> use domain with ID <domain ID>
-m initiate a Shelf Manager switch-over
-s initiate a HPI Daemon switch-over
-V print version information and exit
-h display this help and exit
#------------------------------#