10 ipmi command control, Table 4-29, Hpi restart daemon state – Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) User Manual
Page 68: Table 4-30, Ipmi command rdr, Using hpi-b
Using HPI-B
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide
68
4.4.10 IPMI Command Control
IPMI command control is used to execute IPMI commands on a given resource id. This control
is created for all the FRUs in the shelf. hpiipmi client application makes use of this control to
get the IPMI commands executed.
RdrTypeUnion.CtrlRec.Num
MOTHPI_CTRL_NUM_HPI_RESTART_DA
EMON
RdrTypeUnion.CtrlRec.Type
SAHPI_CTRL_TYPE_DIGITAL
RdrTypeUnion.CtrlRec.OutputType
SAHPI_CTRL_GENERIC
RdrTypeUnion.CtrlRec.TypeUnion.Digi
tal.Default
SAHPI_CTRL_STATE_OFF
RdrTypeUnion.CtrlRec.DefaultMode.Mo
de
SAHPI_CTRL_MODE_MANUAL
RdrTypeUnion.CtrlRec.DefaultMode.Re
adOnly
SAHPI_TRUE
RdrTypeUnion.CtrlRec.WriteOnly
SAHPI_FALSE
RdrTypeUnion.CtrlRec.Oem
Assigned by HPI implementation.
RdrTypeUnion.CtrlRec.IdString
MOTHPI_CTRL_NAME_HPI_RESTART_D
AEMON
Table 4-29 HPI Restart Daemon State
SaHpiCtrlStateT
Value
Type
SAHPI_CTRL_TYPE_DIGITAL
StateUnion.Digital
SAHPI_CTRL_STATE_PULSE_ON |
SAHPI_CTRL_STATE_OFF
Table 4-28 HPI Restart Daemon RDR (continued)
SaHpiRdrT
Value
Table 4-30 IPMI Command RDR
SaHpiRdrT
Value
RecordId
Assigned by HPI implementation