Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) - Manual (Page 88)

Using HPI-B
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide 88
The open source tool ipmitool can be used as SOL client. Example usage:
ipmitool -I lanplus -H 172.17.103.140 -L OPERATOR -U solusername -
P soluserpassword sol activate
4.7 Using the Firmware Update Management
Instrument
The Artesyn HPI-B distribution supports the Firmware Update Management Instrument (FUMI)
feature as defined in the SAI-HPI-B-02.01 Service availability forum hardware platform
interface specification.
FUMI allows to programmatically update the following software types on the following FRUs
within the Centellis CO 31kX/4100/2000/4410 environment.
Table 4-50 Firmware Update Management Instrument-Supported Image Types and Blades/FRUs
Image Type Upgradeable by FUMI on the following Blades/FRUs
IPMC/MMC firmware ATCA-7221
ATCA-M100
ATCA-MF105
ATCA-A100
ATCA-7107
SAM1410
31kX/C4100 Power Entry Modules
31kX/C4100 and C2000 Blowers
All ATCA boards and AMCs/RTMs supporting HPM.1 upgrade via IPMI
U-Boot firmware ATCA-M100
ATCA-MF105
SAM1410
Root file system ATCA-M100
ATCA-MF105
SAM1410