Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) - Manual (Page 89)

Using HPI-B
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide 89
A detailed description of FUMI is beyond the scope of this manual. Refer to the FUMI section in
SAI-HPI-B-02.01 specification for detailed description. For release-specific restrictions of the
FUMI functionality, refer to the system release notes, which are delivered together with your
system.
In order to get started with FUMI, you may want to use the hpifumi example tool, which is
delivered as part of the HPI-B client RPMs. Just like the other example applications (see
Appendix A, Example Applications ), hpifumi is invoked via the command line and is controlled
via command line parameters. It internally invokes FUMI function calls. A detailed description
of hpifumi is given below.
Description
hpifumi
allows to invoke underlying FUMI function calls via the command line interface, and
thus update software images via the command line interface.
Synopsis
hpifumi [-d DOMAIN_ID] [-r RESOURCE_ID] [-f FUMI_NUM] [-b BANK_NUM]
[-s URI] [-u] [-v] [-i] [-t] [-a] [-g] [-y] [-c] [-V] [-h]
OS kernel ATCA-M100
ATCA-MF105
SAM1410
Table 4-50 Firmware Update Management Instrument-Supported Image Types and Blades/FRUs
Image Type Upgradeable by FUMI on the following Blades/FRUs
When upgrading blades or other FRUs, make sure to use only images provided by Artesyn and
make sure that the image types and versions are suitable for the blade or FRU which you want
to upgrade. You should use the images in tar format which contains the upgrade image itself
and some metainfo.
When upgrading IPMC firmware images, OEM FRU data records are by default preserved
during the upgrade. Whether OEM FRU data records are preserved or not, can be configured
in the configuration file /etc/bbs-hpib/bbs-hpib.conf in the section ipmidirect. The entry is:
FumiPreserveOemrecords = yes/no (yes = default).