5 cooling management, Table 4-38, Sol configuration state – Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) User Manual
Page 73: Cooling management, Using hpi-b
Using HPI-B
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide
73
4.5
Cooling Management
As mentioned earlier, the HPI daemon software of the ATCA-M100/MF105/SAM1410 performs
shelf management functions. One of the most important functions is cooling management.
Details are given in the following sections.
WriteOnly
SAHPI_FALSE
Oem
0
Table 4-38 SOL Configuration State
SaHpiCtrlStateT Value
Type
SAHPI_CTRL_TYPE_OEM
StateUnion.Oem.MId
OHHPI_MANUFACTURER_ID_MOTOROLA
StateUnion.Oem.BodyLength
18 ( max - 255 )
StateUnion.Oem.Body
Parameters
0(SetInProgress)
1(SOL Enable)
2(SOL authentication)
3(Character accumulate interval and
character send threshold)
4(SOL Retry)
5(SOL non-volatile bit rate)
6(SOL volatile bit rate)
7(SOL payload channel)
8(SOL payload port)
For more information, refer to IPMIv2 spec, section
26, SOL commands, Table 26-5, SOL Configuration
Parameters.
Table 4-37 SOL Configuration Control (continued)
SaHpiCtrlRecT
Value