Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) - Manual (Page 23)

Software Installation and Configuration
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide 23
2.2.2 Configuring the HPI Daemon
At start-up, each HPI daemon reads the following configuration file: /etc/bbs-hpib/bbs-
hpib.conf
.
Generally, you should not change any values. All settings are set to appropriate values.
/etc/init.d/bbs-hbpb
Daemon start/stop script.
Table 2-3 Overview of HPI-B Directories and Files on ATCA-M100/MF105/SAM1410 (continued)
Directory/Files Description
Table 2-4 HPI Tags
Tag Description Allowed values Default in Config. file
Built-in
Default
OPENHPI_INTERACTIVE
interactive daemon with
command line interface
"YES | NO" [NO]
- non-interactive
YES
- interactive
NO
OPENHPI_CONFIG_REPLICATION
replicate this
configuration file to
standby
"YES | NO" [NO]
- no replication
YES
- replicate
NO
OPENHPI_DEL_SIZE_LIMIT
sets the maximum size for
the domain event log
<0…N> [1000]
- max size is 1000
0
- unlimited
10000
OPENHPI_ON_EP
Sets the entity path on
which the application is
running. This entity path
will be returned when
SaHpiResourceIdGet
()
is called
"{ADVANCEDT
CA_CHASSIS,
<shelf_id>}
" [{ADVANCEDTCA_CHASSIS,
0}] {ADVANCED
TCA_CHASS
IS,0}
OPENHPI_EVT_QUEUE_LIMIT
sets the maximum
number of events that are
allowed in the session's
event queue
<0…N> [1000]
- max size is 1000
0
- unlimited
10000
OPENHPI_DEL_SAVE
sets whether the domain
event log will be persisted
to disk or not. The event
log is written to
OPENHPI_VARPATH
value
"YES | NO" [NO]
- not saved
[YES]
- saved to
OPENHPI_VARPATH
NO
OPENHPI_DAT_SIZE_LIMIT
Sets the maximum size
for the alarm table
<0…N> [1000]
- max size is 1000
0
- unlimited
1000
OPENHPI_DAT_USER_LIMIT
sets the maximum
number of user type
alarm entries allowed in
the alarm table
<0…N> [100]
- max size is 100
100