Burst Electronics LG-1 - Manual (Page 34)

If using Microsoft Paint (Paintbrush) to create a logo,
the size and color settings must be set. This is
accomplished by clicking on Image from the
Paintbrush menu, then clicking on Attributes. (see
Figure 14)
(Figure 14)
In the Image Attributes dialog box, select Pixels for the
units and then type 256 for the width and 64 for the
height. Now the select Black and White bullet for the
Colors. Click Ok to begin creating a logo. (see Figure
15)
LG-1+ and LG-4 Logo Generators 33