Lynx Studio Hilo Reference A/D D/A Converter System - Owner's Manual with LT-USB User Manual
Page 16
Page 12
LT-USB Firmware Upgrade
Disregard this page. This is no longer used as the interface for LT-USB
firmware updates. See section 3.9 for the current firmware update process.
Device Info
This page provides information for the Lynx Technical support staff. Please
note that the “Streaming Mode” and “Volume Control” settings are not
implemented at this time and should not be changed from their current values.
Clock Source
This setting allows the Hilo clock source to be changed from within the host
ASIO application. Sources that are marked by (not valid) should NOT be
selected. If selecting an external clock source here, while a project is open in
your DAW software, make sure that the generated sample rate from the clock
source matches the sample rate of your project.