Lynx Studio Hilo Reference A/D D/A Converter System - Owner's Manual with LT-USB User Manual
Page 32
Page 28
3.4.8.3 Input Sources
This is for signals from the Analog Line In ports.
Of the three stereo digital formats: AES, SPDIF Coax and SPDIF Optical, only one
can be active at a time. This is selected from the “Digital In Source” button from the
Home menu.
These sources correspond to USB play devices that will appear in the host computer.
Unlike most computer audio interfaces, with Hilo these sources are user routable for
maximum flexibility.
Upon installation, each pair of computer play devices will be pre-assigned to physical
outputs on Hilo. In addition, the first channel pair, USB 1+2, will deliver audio to
every output on Hilo. This is very useful for initial set up, whether you are listening to
the headphone out, a digital out, monitor outs, whatever – you will get audio when you
choose 1+2 as the play device.
When Hilo is in 8-
channel LT-USB
Mode, USB channels
1-8 are visible and
available.
When the 16-channel USB
Mode is engaged, all 16
USB input and output
channels are visible and
available.
If a valid ADAT lightpipe signal is detected on the
optical input, then the ADAT inputs are visible and
available in stereo pairs.