Lynx Studio Hilo Reference A/D D/A Converter System - Owner's Manual with LT-USB User Manual
Page 30
Page 26
First a few conventions:
RED buttons mean that the associated signal source or output is OFF or MUTED
GREEN buttons mean ON or UNMUTED
A WHITE LINE around a button means this is the channel is in focus, and can be acted upon
by the faders or ON/OFF switch below the fader.
As you can see, the page is divided into input sources on the left
and outputs on the right. What we are seeing here is which input
sources are assigned to the displayed output. We are not turning
inputs On and Off, we are turning the connection between an
input and output On or Off. Think of it as a patch cable.
The ON/OFF button on the Inputs side patches that input source to the active output. On the Output side, the On/Off
button mutes or un-mutes the selected output.
In the Graphic above, we see the default state of USB channels 1&2 being routed to the Hilo’s Line Out.
3.4.8.1 Monitor Source Modes
The default state for each input source is stereo, with two channels of input, streaming through a two-channel output.
There are 4 different options for routing an input signal to an output. These selections pertain to the operation of a
specific input source routed to a specific output. The setting is not global, and must be set for each output that is being
used.