Lynx Studio Hilo Reference A/D D/A Converter System - Owner's Manual with LT-USB User Manual
Page 52
Page 48
3.7.7 Show/Hide Recall Scene
This also is a toggle type button which allows you to add Recall
Scene to the top right corner of the VU or Horizontal Meters
pages. When set to “Show”, you can recall Scenes directly from
the Meter pages.
3.7.8 Calibrate Touchscreen
The LCD Touchscreen has a grid that detects when you touch it to select or change settings. If you find that the touch
response gets slow or does not always engage properly, you may need to recalibrate the touch screen.
• Push the Calibrate Touchscreen button.
• The screen will go black and give you instructions for recalibrating
the screen.
Simply follow the instructions and the previous screen will come up when
done. Be sure to touch directly in the center of the target to give the most
accurate touchscreen calibration.
With a touch screen it is easy to engage the wrong function by mistake.
This screen allows you to back out of this command if you wish.
There are times when calibrating the touchscreen is necessary for
optimum performance. However if this setting was selected
unintentionally, now you can overrule the request and return to the
Display Menu page.
3.8 Meter Button
This button simply sends you back to the last Meter page that you selected.