Lynx Studio Hilo Reference A/D D/A Converter System - Owner's Manual with LT-USB - Manual (Page 31)

Page 27
Select the Output channel that you wish to listen to, then press the desired input
source (in this example, Line In).
Then tap the Stereo button under the input meters. You can now choose between:
• Stereo (default)
• Left –audio from the Left input channel (in this case Line In Left) streaming to
both output channels
• Right –the Right input channel streaming to both output channels
• Sum – combining both the Left and Right inputs into one Mono stream which is
sent to both the Left and Right outputs equally. The summed signal is
automatically attenuated by 3dB in order to reduce the possibility of digital
clipping.
The chosen option is shown on the button at the bottom of the Input meters any time
that input channel is selected.
Each input channel can be controlled and assigned independently for each output.
For example, you can have Line In “Summed” sent to the Monitor Output, while
having Line In “Stereo” assigned to the Headphone Output. This flexibility allows
complex routing to be achieved very easily.
3.4.8.2 Solo Button
The new Solo button allows any active input channel to be isolated. This allows very
rapid comparison of sources, A/B switching, and a convenient way for
troubleshooting audio anomalies.
Simply press the Solo button and it will engage and turn green with the word “Solo”
blinking.
In this state, press any input source button and you will hear that audio exclusively.
Pressing any other input source will instantly switch to the alternate source.
When done, tapping the Solo button returns Hilo to the previous state, where
multiple input sources can stream to an output simultaneously.