Rena Envelope Imager CS - Manual (Page 10)

SECTION 2
INSTALLING THE PRINTER
Install the Inkjet Cartridges
The Envelope Imager CS uses two ink cartridges, the C6657 Color cartridge and the
C6656 Black cartridge or C6658 Photo cartridge. Use the C6656 Black cartridge for
everyday printing and the C6658 Photo Cartridge for photos and high quality printing.
Install and replacing the cartridge is done in the following manner:
1. Plug in the Printer and turn the
main power switch ON. Open the
top cover and press the soft power
button [1], the button will light...
The printhead carriage will move
side to side and the printhead
wiper mechanism will move to its
downward position. Wait until
the mechanism stops moving.
Then open the two printhead
latching covers [2] by lifting them
from the front.
2. Inset the cartridge into their
appropriate positions as shown.
The color cartridge goes on the
left.
3. Press down on the cartridge
latches until you hear a click, and
then close the top cover.
6