Rena Envelope Imager CS - Manual (Page 46)

APPENDIX B
9. Load envelopes to the
top of the side guides
and then place the
weight on top of the pile.
There are two weights,
one for # 9 and one for #
10 envelopes. These
weights keep pressure on
the pile and help feeding.
They are designed to
permit feeding of the last
envelope in the stack
without the weight
feeding into the printer.
NOTE
THIS KIT IS NOT A SUBSTITUTE FOR POORLY MANUFACTURED ENVELOPES.
ENVELOPES THAT ARE SEVERELY TWISTED OR DO NOT HAVE SQUARE
CORNERS WILL STILL PRODUCE POOR FEEDING.
ALL ENVELOPES SHOULD BE FANNED BEFORE LOADING IN THE PRINTER.
42