RGBLink VSP 729 - Manual (Page 101)

VSP 729 User Manual 101
Download the IP software
Turn off the power, take the two coding switc h to ―ON‖ state as below:
Connect one side of the RJ11 download line to the RS232 on the video
processor, and the other side being connected to the serial port on the PC.
Double click to run flash magic, setting as below:
Firstly, users can choose the right serial port, set the Boud rate to 9600,
choose LPC2368, and to load the aim document (hex file) for IP board
upgrading; Secondly, confirm the two option box by check.
Finally, click the ―start‖ button.