How to control processor through rs232, Communication software guideline – RGBLink VSP 729 User Manual
Page 76
5. Communication Software Guideline
How to control processor through RS232?
VSP 729 User Manual 76
How to control processor through RS232?
Firstly，install the control software in your PC;
Take out the RS 232 cable as following（RS-232, with 9-pin on one end，
RJ 11 on the other side.） Connect one side of the RJ11 download line to
the RS232 on the video processor VSP729, and the other side to be
connected to the serial port on the PC.
If there is no any Serial port on your PC, you will need another Serial to
USB adapter. Connect one end of the RJ11 download line to the RS232 on
the video processor. Connect the end of USB-side to the PC, Ensure the
cable connection is good. Turn on the Video Processor VSP 729.
Right click the【My Computer】on the home screen of control PC. Enter
【Attribute】, Find【Hardware】Option，as following.