RGBLink VSP 729 - Manual (Page 36)

2.Hardware Orientation
VSP 729 Front Panel Keyboard Operation
VSP 729 User Manual 36
Pressing to ready to save user customize configuration: SAVE CONFIG 1
、2、
3
、4、5、6.Pressping SAVE CONFIG 1、2、3、4、5、6 to recall the saving
parameters
；
SAVE CONFIG 1
、2、3、4、5、6，select mode，such as 1：
Out format selection, Pressing this button inter into current format, select
the format through rotary switch
，VSP 729 support four output resolution，
More details please refer to OUT
；
Pressing to go to scaling setting
，under PIP can set sub-main image size
and position
；
Note
Scaling is only valid for the program output,while
preview image keeps full screen.Scale is only
enable when user select the same layer under
Preview and Program.
User can change the screen size and position through change numeric
parameters.Apply to LED user.
Save Setting to:
Press Menu To Exit
Save Setting to:
SAVE1
Finished!l