Communication software guideline – RGBLink VSP 729 User Manual
Page 78
Advertising
5. Communication Software Guideline
How to control processor through RS232?
VSP 729 User Manual 78
Check and Press【Serial】
,Serial Port , for example, is COM6 which is
checked from device manager. Set VSP 729 Boud Rate to be :115200,
Click【Confirm】after setting.
Click
【 open serial】,check if【COM】icon on the bottom right corner,
when there is the prompt green
showing on the
software, it means the communication is ok , and you can use the software
to control the device now.
Note
If power off during communication, should close
the por
t
, by first, and plug in out of the USB
and do communication.
Advertising
This manual is related to the following products: