Wizard – Airlink RTW026 User Manual
Page 37
Chapter 4: Web Configuration
27
Wizard
Now you are getting onto the web page for proceeding setting up for your router. To configure your Wireless
Broadband Router in easy way, please press Setup.
W
W
A
A
N
N
T
T
y
y
p
p
e
e
Some types for WAN connection are provided here. Specify a Dynamic IP(Cable Modem), Static IP, PPPoE and
PPTP as the WAN connection type. Next pages will be changed slightly according to the connection type you choose
here. It allows you to specify how the WAN port of the router connects to your service provider’s server. Please
choose your connection mode by clicking on the radio button as required by your service provider.
PPPoE: PPP over Ethernet is a protocol for connecting remote hosts to the Internet over an
always-on connection by simulating a dial-up connection. With PPPoE the client does not set
a static IP address, instead an IP address is assigned dynamically whenever the client access
to the Internet.
For Dynamic IP (Cable Modem), the settings will be:
Host Name:
Type in your host name.
MAC Clone Address:
Type in the MAC address.
Enable:
Check this box to enable the MAC Clone address for your router.
Clone MAC Address:
Copies the MAC address of your PC to this field.
Back:
If you don’t want to adapt this setting, please press the Back button to
return to WAN type screen for choosing another setting.
Finish:
Click this button to finish the wizard.
For Static IP, the settings will be: