Airlink RTW026 - Manual (Page 66)

Wireless Broadband Router User’s Manual
56
Apply: Save the data on the screen and apply the data after restarting the router.
Cancel: The “Cancel” button will discard any data you have entered and reload the file from the
Router.
E-Mail Alert
This mechanism will send e-mails to specific users automatically according to the settings that you configure in the
following window.
Alert Status: If Enabled, the function will be activated.
If not Enabled, no one will receive any message about the router.
From: Type in the name of the mail sender, such as string, host name, or a pronoun.
To: Type in the e-mail address that you want to send to. Usually, the ones put here is the most
important persons that you want to inform.
Copy to: Type in the e-mail address that you want to send to. Usually, the ones put here is less
important then “To” entry.
Subject: Type in the subject of the mail that you want to let the receiver know.
SMTP Server: Type in IP address or Domain Name
Mail Priority: Decide the importance of the mail.
Event Level: Choose the essence of the event.
Interval: Tell the system the time to wait to send e-mail while events listed on the Interested Events
occur.
Interested Events: Check the ones that you need.
Select All Click this button to check all the events listed on the Interested Events.
Apply Save the data on the screen and apply the data after restarting the router.
Close The “Close” button will discard any data you have entered and reload the file from the
Router.