Airlink RTW026 User Manual
Page 42
Wireless Broadband Router User’s Manual
32
128 Bit Encryption
If selected, data is encrypted using the key before being transmitted. The receiving station
must be set to use 128 Bit Encryption, and have the same Key value. Otherwise, it will
not be able to decrypt the data.
Keys – Enter the key values you wish to use. Other stations must have the same key
values.
Authentication Mode:
Select the appropriate value: “Open System” or “Shared Key”. Check your Wireless
card’s documentation to see what method to use. Some Wireless Cards do not support
both methods.
WEP Key Type:
Select ASCII or HEX as the WEP Key display method.
Passphrase:
To generate a set of keys from a word or phrase:
1.
Select the type of key required (64-Bit or 128-Bit)
2.
Enter the word or phrase in the “Passphrase” field.
3.
Click the “Generate Keys” button.
4.
The screen will refresh with the key values inserted.
WEP Key #1 - #4:
Please select encryption key length and fill out WEP keys. The system allows you to type
in 4 kinds of the WEP key.
Radius Server:
It is a protocol for carrying authentication, authorization, and configuration information
between a Network Access Server which desires to authenticate its links and a shared
Authentication Server.
Choose Enable to activate this function. Type in the necessary settings on to the lines of
IP Address, Port, Shared Secret, and Time-out.
Generate Key:
Click this button will use the passcode for generating WEP keys.
Advance Setting:
Click this button will pop up another dialog for you to set more detailed settings for the
wireless setting.
Apply:
Save the data on the screen and apply the data after restarting the router.
Cancel:
The “Cancel” button will discard any data you have entered and reload the file from the
Router.