Airlink RTW026 User Manual
Page 39
Chapter 4: Web Configuration
29
For PPTP, the settings will be:
PPTP Account:
Type in the user name to access the remote server or your service
provider.
PPTP Password:
Type in the password to access the remote server or your service provider.
Confirm password:
Type your password again for confirmation.
Host Name:
Enter the name of your host.
Remote IP Address:
You can assign a remote computer to access into this router for
controlling. Please type in the remote IP address in this field.
My IP Address:
Type in your IP address that you get from ISP for connection.
My Subnet Mask:
You have to specify the subnet mask for the router in order to let remote
user access into the router that your computer connected.
Gateway:
This is an optional setting. Please enter the Gateway if necessary.
Connection ID:
This is an optional setting. Please enter the connection ID that your ISP
provided you if necessary. If not, leave this box as zero.
MTU (1400-1460):
Enter the maximum transmission rate for the data transferring. The
default setting is 1460.
Maximum Idle Time:
This value specifies the idle minutes that elapse before the Home Route
automatically disconnects the PPTP session. If no traffic is passing
through during the span of time your specified, the PPTP session is
terminated.
Auto-reconnect:
Check this box if you want the router to be connecting Internet
automatically after the Idle time that you set here.
Back:
If you don’t want to adapt this setting, please press the Back button to
return to WAN type screen for choosing another setting.
Finish:
Click this button to finish the wizard.