Verifying the configuration – H3C Technologies H3C S12500-X Series Switches User Manual

Page 210

Advertising
background image

199

[PE2-bgp-ipv4-vpn1] quit

[PE2-bgp-vpn1] quit

[PE2-bgp] quit

Verifying the configuration

# The output shows that among the routes advertised by PE 2 to CE 2, the AS_PATH of 100.1.1.0/24 has

changed from 100 600 to 100 100.

*Jun 13 16:15:59:456 2012 PE2 BGP/7/DEBUG: -MDC=1;

BGP.vpn1: Send UPDATE to peer 10.2.1.1 for following destinations:

Origin : Incomplete

AS Path : 100 100

Next Hop : 10.2.1.2

100.1.1.0/24,

# Display again the routing information that CE 2 has received and the routing table.

<CE2> display bgp routing-table ipv4 peer 10.2.1.2 received-routes

Total number of routes: 3

BGP local router ID is 200.1.1.1

Status codes: * - valid, > - best, d - dampened, h - history,

s - suppressed, S - stale, i - internal, e - external

Origin: i - IGP, e - EGP, ? - incomplete

Network NextHop MED LocPrf PrefVal Path/Ogn

* >e 10.1.1.0/24 10.2.1.2 0 100?

* e 10.2.1.0/24 10.2.1.2 0 0 100?

* >e 100.1.1.0/24 10.2.1.2 0 100 100?

<CE2> display ip routing-table

Destinations : 18 Routes : 18

Destination/Mask Proto Pre Cost NextHop Interface

0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

10.1.1.0/24 BGP 255 0 10.2.1.2 Vlan12

10.2.1.0/24 Direct 0 0 10.2.1.1 Vlan12

10.2.1.0/32 Direct 0 0 10.2.1.1 Vlan12

10.2.1.1/32 Direct 0 0 127.0.0.1 InLoop0

10.2.1.255/32 Direct 0 0 10.2.1.1 Vlan12

100.1.1.0/24 BGP 255 0 10.2.1.2 Vlan12

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0

200.1.1.0/24 Direct 0 0 200.1.1.1 Vlan13

200.1.1.0/32 Direct 0 0 200.1.1.1 Vlan13

200.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0

200.1.1.255/32 Direct 0 0 200.1.1.1 Vlan13

Advertising