Verifying the configuration, Ipv6 mpls l3vpn configuration examples, Configuring ipv6 mpls l3vpns – H3C Technologies H3C S12500-X Series Switches User Manual

Page 281

Advertising
background image

270

[CE2-Vlan-interface10] ip address 100.1.1.2 24

[CE2-Vlan-interface10] quit

Verifying the configuration

# Display L2VPN PW information on PE 1. The output shows that two LDP PWs have been established.

<PE1> display l2vpn pw

Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon

Total number of PWs: 2, 1 up, 1 blocked, 0 down, 0 defect

Xconnect-group Name: vpna

Peer PW ID In/Out Label Proto Flag Link ID State

2.2.2.2 20 65662/65660 LDP M 1 Up

3.3.3.3 30 65659/65655 LDP B 1 Blocked

# Display detailed information about the primary and backup PWs on PE 1.

<PE1> display l2vpn pw verbose

Xconnect-group Name: vpna

Connection: ldp

Peer: 2.2.2.2 PW ID: 20

Signaling Protocol : LDP

Link ID : 1 PW State : Up

In Label : 65662 Out Label: 65660

In Label : 1151 Out Label: 1279

Wait to Restore Time: 0 sec

MTU : 1500

PW Attributes : Main

VCCV CC : -

VCCV BFD : -

Tunnel Group ID : 0x1800000760000005

Tunnel NHLFE IDs : 133

Peer: 3.3.3.3 PW ID: 30

Signaling Protocol : LDP

Link ID : 1 PW State : Blocked

In Label : 65659 Out Label: 65655

In Label : 1150 Out Label: 1279

MTU : 1500

PW Attributes : Backup

VCCV CC : -

VCCV BFD : -

Tunnel Group ID : 0x1800000860000006

Tunnel NHLFE IDs : 135

# Display L2VPN PW information on PE 2. The output shows that an LDP PW has been established.

[PE2] display l2vpn pw

Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon

Total number of PWs: 1, 1 up, 0 blocked, 0 down, 0 defect

Xconnect-group Name: vpna

Peer PW ID In/Out Label Proto Flag Link ID State

Advertising