H3C Technologies H3C S12500-X Series Switches - Manual (Page 83)

72
ket, press CTRL_C to break
1 30.1.1.2 (30.1.1.2) 3.000 ms 7.000 ms 3.000 ms
2 * * *
# Execute the display mpls lsp command on Switch A. The output shows that only one CRLSP exists on the
switch.
[SwitchA] display mpls lsp
FEC Proto In/Out Label Interface/Out NHLFE
1.1.1.9/3/48984 RSVP -/1150 Vlan4
30.1.1.2 Local -/- Vlan4
# Execute the display ip routing-table command on Switch A. The output shows a static route entry with
interface Tunnel 3 as the egress interface.