Mep list, Cfd functions, Continuity check – H3C Technologies H3C S10500 Series Switches User Manual

Page 28

Advertising
background image

19

By cooperating with MEPs, a MIP can perform a function similar to ping and traceroute. Like a MEP, a

MIP forwards packets of a different level without any processing and only processes packets of its level.

Figure

6

demonstrates a grading example of the CFD module. Six devices, labeled A through F

respectively, exist. Suppose each device has two ports, and MEPs and MIPs are configured on some of

these ports. Four levels of MDs are designed in this example, the bigger the number, the higher the level

and the larger the area covered. In this example, Port 1 of device B is configured with the following

MPs—a level 5 MIP, a level 3 inward-facing MEP, a level 2 inward-facing MEP, and a level 0

outward-facing MEP.

Figure 6 Levels of MPs

Device A

Device B

Device C

Device D

Device E

Device F

5

5

3

5

5

3

3

3

2

2

2

2

0

0

0

0

0

0

MD level 5

MD level 3

MD Level 2

MD Level 2

MD level 0

Port

5

Outward-facing MEP and MD level

5

MIP and MD level

Maintenance association

Logical path of CFD messages

Port 1

Port 2

MD level 0

MD level 0

3

Inward-facing MEP and MD level

2

2

2

2

MEP list

A MEP list is a collection of local MEPs allowed to be configured and the remote MEPs to be monitored

in the same MA. It lists all the MEPs configured on different devices in the same MA. The MEPs all have
unique MEP IDs. When a MEP receives from a remote device a continuity check message (CCM) that

carries a MEP ID not included in the MEP list of the MA, it drops the message.

CFD functions

CFD works effectively only in properly-configured networks. Its functions, which are implemented through
the MPs, include:

Continuity check (CC)

Loopback (LB)

Linktrace (LT)

Continuity check

Connectivity faults are usually caused by device faults or configuration errors. Continuity check checks

the connectivity between MEPs. This function is implemented through periodic sending of continuity
check messages (CCMs) by the MEPs. As a multicast message, a CCM sent by one MEP is intended to

be received by all the other MEPs in the same MA. If a MEP fails to receive the CCMs within 3.5 times

Advertising