H3C Technologies H3C S10500 Series Switches - Manual (Page 76)

67
Displaying and maintaining RRPP
To do… Use the command… Remarks
Display brief RRPP information
display rrpp brief [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display RRPP group configuration
information display rrpp ring-group [ ring-group-id ] [ |
{ begin | exclude | include } regular-expression ] Available in any view
Display detailed RRPP information
display rrpp verbose domain domain-id [ ring
ring-id ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display RRPP statistics
display rrpp statistics domain domain-id [ ring
ring-id ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Clear RRPP statistics
reset rrpp statistics domain domain-id [ ring
ring-id ] Available in user
view
RRPP configuration examples
Single ring configuration example
Networking requirements
As shown in
Figure
20 ,
• Device A, Device B, Device C, and Device D form RRPP domain 1. Specify the primary control
VLAN of RRPP domain 1 as VLAN 4092. RRPP domain 1 protects VLANs 1 through 30.
• Device A, Device B, Device C, and Device D form primary ring 1.
• Specify Device A as the master node of primary ring 1, GigabitEthernet 1/0/1 as the primary port
and GigabitEthernet 1/0/2 as the secondary port.
• Specify Device B, Device C, and Device D as the transit nodes of primary ring 1. Specify their
GigabitEthernet 1/0/1 as the primary port and GigabitEthernet 1/0/2 as the secondary port.
Figure 20 Network diagram for single ring configuration