Status indicators, Front panel indicators, Power led – Grass Valley K2 Media Client Service Manual Nov.18 2008 User Manual
Page 28: Service led
28
K2 Media Client Service Manual
July 28, 2008
Chapter 1 Product Description
Status indicators
The following sections describe the visual and audible indicators that communicate
the current operating status and system health of the K2 Media Client.
Front panel indicators
You can see the front panel LEDs while the front bezel is closed or open.
Power LED
This LED indicates status as follows:
Off: The standby switch is set to Off and the K2 Media Client is not operational.
WARNING: The power standby switch does not turn off power to the
system. To turn power off the system must be disconnected from the
power source.
Steady on (green): The standby switch is set to On and the K2 Media Client is either
in the startup process or has competed the startup process and is operational.
Service LED
The following table explains the status conditions indicated by the different Service
LED behaviors. If two or more status conditions occur simultaneously, the LED
displays the behavior for the highest priority condition.
!
Power
LED
Service
LED
Bezel Release
Buttons
!
LED behavior
Status Condition
Priority
Flashing pattern alternating
Yellow/Green/Red/Off twice a
second
Identify — The K2 Media Client is being directed to
identify itself by NetCentral or some other
application.
1