Grass Valley K2 Media Client Service Manual Nov.18 2008 - Manual (Page 70)

70 K2 Media Client Service Manual July 28, 2008
Chapter 3 Service Procedures
2. If you have not already done so, connect keyboard, monitor, and mouse to the K2
Media Client.
3. Insert the Recovery CD and restart the machine.
The machine boots from the disc. The Acronis True Image program loads.
4. At the startup screen, select True Image (Full Version) .
The Acronis True Image program loads.
The Acronis True Image main window appears.
5. In the Acronis True Image main window, click Backup .
The Create Backup Wizard opens.
6. On the Welcome page, click Next .
The Select Backup Type page opens.
7. Select The entire disk contents or individual partition and then click Next .
The Partitions Selection page opens.
8. Select the System (C:) and the Database (D:) partitions and then click Next .
The Backup Archive Location page opens.
9. In the tree view select the Backup (E:) partition and then enter the name of the image
file you are creating. Create the file name using the K2 Media Client hostname and
the date. Name the file with the .tib extension. For example, if the hostname is
K2Client1, in the File name field you would have
E:\K2Client1_20051027.tib . Click Next .
The Backup Creation Options page opens.
10.Do not change any settings on this page. Click Next .
The Archive Comment page opens.
11. If desired, enter image comments, such as the date, time, and software versions
contained on the image you are creating. Click Next .
The “…ready to proceed…” page opens.
12. Verify that you are creating images from the C: and D: partitions and writing to the
E: partition. Click Proceed .
The Operation Progress page opens and displays progress.
13. When a “Backup archive creation has been successfully completed” message
appears, click OK .
14. Click Operations | Exit to exit the Acronis True Image program.
The K2 Media Client restarts automatically.
15. Remove the Recovery CD while the K2 Media Client is shutting down.
16. Upon restart, log on to Windows. When the AppCenter log on appears, you can
cancel.
17. Open Windows Explorer and find the image file on the E: partition.