Grass Valley K2 Media Client Service Manual Nov.18 2008 - Manual (Page 55)

July 28, 2008 K2 Media Client Service Manual 55
Name team
c. Click Modify Team . A dialog box opens.
9. On the Adapters tab, do the following:
a. Select the top entry, which is Intel® PRO/1000 MT Dual Port Server Adapter (Type
I MB) or Intel® PRO/1000 EB Network Connection with I/O Acceleration (Type II
and Type III MB), and click Set Primary .
b. Select Intel® PRO/1000 MT Dual Port Server Adapter #3 (Type I MB) or Intel®
PRO/1000 MT Dual Port Server Adapter (Type II and Type III MB) and click Set
Secondary .
10. Click OK and OK and to close dialog boxes.
11. Do not create a media team for the media (iSCSI) network. The two remaining
connections remain as independent ports and are used as follows:
• Media Connection #1, which is GigE port 2 on the K2 Media Client rear panel,
is the connection for the media (iSCSI) network on a non-redundant K2 Storage
System, or for the “A” media (iSCSI) network on a redundant K2 Storage
System.
• Media Connection #2, which is GigE port 4 on the K2 Media Client rear panel,
is not used on a non-redundant K2 Storage System. It is the connection for the
“B” media (iSCSI) network on a redundant K2 Storage System.
12. Restart the K2 Media Client.
Continue with the next procedure “Name team” .
Name team
The following procedure is intended for use on shared storage models only.
1. On the Windows desktop right-click My Network Places and select Properties . The
Network Connections window opens.